The helmet is one of the most important pieces of safety equipment that a biker has. It’s not just about protection from head injury; and it also protects the eyes and face from debris, bugs, and other dangers on the road. With so much riding time spent in direct sunlight, there’s no question that your visor will need at least occasional cleaning to keep it clear.
Driving a motorcycle is one of the most exhilarating experiences you can have. It’s also one of the most dangerous. With so many things around on the road, it’s important to protect your eyesight at all costs. A clean visor will keep your vision clear and safe while driving. In this blog post, we will discuss how to clean helmet visors using easy steps. So, read on!
How to Clean Helmet Visor: Guideline
What is the best way to clean my helmet? Usually, we ask ourselves this question, and to answer it, we need the best materials. The best cleaning solution for helmet screens is to use specific cleaning products
The purpose of glass cleaners is not to clean our helmet screens because helmet screens are generally made of plastic and are not made of glass. Plastic can be damaged by window cleaners who use chemicals that compromise their clarity and structural integrity.
In the case of a helmet screen cleaner, it is recommended to apply the product to a moistened cloth and then rub it gently. You can use a cloth wetted with hot water and soap instead of a cleaner.
Clean clothes and cleaning products designated for helmets and screens constitute the cleaning elements. Handprints and fingerprints are usually left on the screen of our helmets when we manipulate them, but the most irritating are the insects, which remain stuck on the screen. The screen can get scratched if we do not clean it carefully.
If this is the case, applying the helmet cleaner directly to the dirt will be the best solution since the liquid will soften the bugs and help them decompose.
Method 1. Using Neutral Soap for Homemade Cleaning
For a helmet screen, use cleaning products with formulas that are designed for a fragile surface. However, homemade cleaning solutions are also available that can assist you in cleaning your helmet screen.
-
Soaping
Our preferred method involves lathering your hands with neutral soap, then rubbing the screen horizontally with your fingers. In the bathrooms of gas stations, bars, and restaurants, the soap is usually neutral to ensure your peace of mind. To prevent greater damage, we always recommend not casting it directly on it.
-
Cleaning
Next, it’s important to avoid scratching any insect remnants that already remain attached. If they are particularly sticky, repeat the operation – wet your hands, use soap on them, rub them as you wash them, and then wipe on the screen. Always be gentle and delicate. Be patient and do not give up because this is undoubtedly the fastest way to damage the surface.
-
Cleared up
Once all the dirt has been removed, rinse the screen with water. Do this without any pressure. If you’re a total newbie, remember to close the helmet’s screen and air intakes to avoid wetting the inside of the helmet as well.
Although it might not go wrong, wearing it will usually make you wet, and with the wetness comes an unpleasant experience. In this case, you would be best suited to learn how to unassemble the screen of your helmet. It is a common feature that greatly improves maneuverability in most of today’s models.
A helmet can be dirty even if only the screen is cleaned, especially if clean in the bathroom is busy, and people keep coming and going.
-
Drying
Choosing between the air hand dryer and a handkerchief or cotton cloth will depend on the drying option you have. Similarly, the smoothness should be improved. You should not put the fabric directly on the air jet or use the screen glued to it. As an analogy, if you take care of your screen, it will resist a thousand battles.
There are other ways to do this if this seems too time-consuming. Lastly, don’t hesitate to use household cleaning chemicals since they will damage the screen and degrade the plastic.
Method 2. Specialty Cleaning Wipes Kits
Wipes made from solutions that numb the screen and remove dirt without damaging them are available in kits.
Wet ones are best for removing dirt and insects first. A method for preventing stretch marks and reflections is dry cleaning. In some cases, you may have to repeat the process due to dirt accumulation. Pinlock visors can be cleaned with it, and it doesn’t contain any alcohol.
Among its major advantages is that it can fit comfortably in your jacket pocket, bike trunk, or under your seat so that you can give your screen a thorough clean at any rest stop or rest area en route.
Method 3. Specific sprays for screens
Sprays and sprays are another format you can find on the market for professional cleaners. You have just to spray it over the screen then wait sometimes to wipe out the dirt. Then use a soft cloth and wipe it gently to remove all dirt. This is the easiest way to clean a helmet screen.
Tips to Remove scratches from the visor
A helmet’s visor is reduced in visibility when scuffed and scratched. Generally, riding a motorcycle at night can reduce visibility, making it difficult to see objects and people around you. A visor that has been scratched will become weak if the wrong methods are used to remove it. Use the same methods used to manufacture the visor to remove scratches and maintain its integrity. Here are the steps to remove scratches from a helmet visor:
You will need the following items:
Sandpaper with a grit of 1500
- Running water
- Rag
- An electric heat gun
- An electric lamp
Steps to Follow:
- Removing the helmet visor from the helmet is the first thing to do.
- Under running water, clean the visor. Sand deeper scratches lightly with 1,500-grit sandpaper. Transform the visor into a miniature. Keep sanding until you don’t catch your fingernail on any scratches.
- A rag can be used to wipe off excess water from the visor. After the visor has been cleaned, let it soak in a dry place for two hours to remove all remaining moisture.
- Turn on a heat gun. Put the temperature at 550 degrees Fahrenheit. The temperature must be reached before the heat gun can operate.
- Turn on the lamp. The hood should be held two to three feet from the lamp.
- You should put the striped side of the visor four inches away from the heat gun. Use the heat gun to continually move across the visor’s face to remove any remaining scratches and scuffs. Avoid holding the heat gun at one location for too long. Let the visor cool for one hour, then install it on the helmet.
Warning: Heat guns should be handled with gloves.
Helmet care tips: avoiding scratches
Make sure the helmet is not bumped.
- To avoid scratches, make sure it’s transported in a specific bag
- The screen should remain open when you let the screen dry after use
- Cleaning it first is always a good idea.
- It should not be placed on any surface.
- If it is not strictly necessary, do not disassemble it
- Motorcycle helmet material should not be damaged or deteriorated by solvents or aggressive chemicals.
A simple method for polishing visor
To clean a helmet, you need to disassemble it to release the visor, sand it to get rid of scratch marks, and then wash it with soap and water.
Using an insect repellent spray or car polish is important to protect yourself from insects. You must use a cloth to clean the screen.
It is important to read the instructions provided by the manufacturer before cleaning the viewer. In addition, some products may have an anti-fog treatment that can weaken or ruin their properties when used with solvent-containing products.
For this, you can also use an alkaline soap. To do this, disassemble the visor and thoroughly clean it on both sides, soaking in the soap solution for a few minutes, rinse, and then wipe off the remaining residue, occasionally moistening to prevent scratches.
On the other hand, Rubbers must be taken better care of since they allow the visor to be closed correctly and prevent water or air from getting inside. The use of petroleum jelly on your fingers will keep them from drying out, as it will prevent them from losing their properties as they evaporate.
Tips to keep screen last for many kilometers
With the winter season coming to an end and summer just around the corner, it’s time for riders to start getting their motorcycles out of storage. Here are a few tips on how you can keep your visor like a new one!
The screen should never be dry cleaned or cleaned with abrasive products.
- If you want as long of a lasting result, you should use only water, not shower soap, hand soap, or glass cleaner.
- There is one more detail. You can use your fingertips to clean the screen, but do not use sponges or rags.
- Leaving the screen closed and with good static stability even if you are wearing the helmet on the motorcycle is ideal. You run the risk of messing it up if you drop the screen open.
Tips to Ensure your safety
Don’t swipe your helmet screen if an insect’s abdomen spills on it, or you’ll have a good chance of ruining it.
- When visibility becomes a problem, open the screen, slow down a bit and tilt your head slightly or look to the fairing for aerodynamic protection.
- The screen needs to be clean while driving at night or during direct sunlight.
- In case it has been grated, please make the change immediately.
Conclusion
We hope this blog post has helped you learn how to clean your helmet visor. It’s not hard and doesn’t take much time at all, so don’t be afraid to tackle it yourself the next time! Don’t forget that we have a wide selection of motorcycle helmets on our site as well if you need one for any reason. Thanks for reading!